Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
base
cover.
3. Replace the
microSD
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Disconnect the battery cable from the connector on the system board.
Steps
1. Remove the single (M2x2) screw that secures the WLAN card bracket to the system board [1].
2. Remove the WLAN card bracket that secures the WLAN antenna cables [2].
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4. Slide and lift the WLAN card away from the connector on the system board [4].
card.
after working inside your
before working inside your
card.
computer.
computer.
Disassembly and reassembly
35