Roland V-02HD MKII Startup Manual page 3

9
Adjusting the video effect
[CONTROL 1] [CONTROL 2] knobs
These adjust the video effect or visual effect (VFX).
5 If the visual effect is on ([VFX] button lit), these knobs
control the visual effect.
5 Operate this while holding down the [VFX] button to
target the audio effect.
What is the program output?
This is the video output that reflects all
processing such as video compositing
and visual effects. It is output from the
PROGRAM OUT connector.
This is the video that is seen by the
people who are watching the live stream
or presentation.
9
Applying a Visual Effect to the Video
& p. 7–9
[VFX] button
Turns the visual effect on/off.
When on, the [VFX] button is lit.
5 You can adjust the audio effect by holding down the
button and operating the [CONTROL 1] and [CONTROL 2]
knobs.
9
Operating the Menu
Here's how to access the menu, and make video/audio settings
and settings for the V-02HD MKII itself. The menu is shown on
the display that's connected to the PREVIEW OUT connector.
1.
Press the [MENU] button to display the MENU screen.
The menu is organized into functions.
2.
Turn the [VALUE] knob to move the cursor to the menu
item that you want to change, and then press the
[VALUE] knob.
3.
Repeat step 2 as needed.
Pressing the [MENU] button moves you back one level
higher.
4.
Turn the [VALUE] knob to change the setting value, and
then press the [VALUE] knob to confirm.
MEMO
5 By turning the [VALUE] knob while pressing it, you can
change the value more greatly.
5 Long-pressing the [VALUE] knob returns the current
menu item you're setting to its default value.
5.
Press the [MENU] button several times to close the menu.
Tripod mounting socket
Operating Guide (Panel Descriptions)
[MENU] button, [VALUE] knob
(bottom panel)
This is used when attaching the
V-02HD MKII to a commercially available
camera tripod. The socket is threaded
for a 1/4" screw.
& p. 9
3