Configuring Protection Profiles - Fortinet FortiGate FortiGate-200A Administration Manual

Firewall

Configuring protection profiles

FortiGate-200A Administration Guide
Note: Some popular email clients cannot filter messages based on the MIME header. Check
your email client features before deciding how to tag spam.
Configuring IPS options
Figure 110:Protection profile IPS options
The following options are available for IPS through the protection profile. See
page 293 for more IPS configuration options.
IPS Signature
IPS Anomaly
Configuring content archive options
Figure 111:Protection profile content archive options
The following options are available for content archive through the protection profile.
Archive content
meta-information
To add a protection profile
If the default protection profiles do not provide the settings you require, you can create
custom protection profiles.
1 Go to Firewall > Protection Profile.
2 Select Create New.
3 Enter a name for the profile.
4 Configure the protection profile options.
5 Select OK.
Enable or disable signature based intrusion detection and
prevention for all protocols.
Enable or disable anomaly based intrusion detection and
prevention for all protocols.
Enable or disable archiving content meta-information to a FortiLog
unit for each protocol. Content meta-information can include date
and time, source and destination information, request and response
size, and scan result. Content archive is only available if FortiLog is
enabled under Log&Report > Log Config > Log Settings.
01-28006-0072-20041105
Protection profile
"IPS" on
229