Activating Talkgroup Scanning; Setting Talkgroups In The Active Scan List; Setting Scan Lists; Deleting Talkgroups From Scan Lists - Motorola MTP830 S Feature User Manual

88 | Main Menu

Activating Talkgroup Scanning

Activating Talkgroup Scanning
When and where to use: If you want to monitor any TMO Group Call in the defined talkgroup list.
Procedure:
1 From the home screen, press the
2 Select More . . . → Group Setup → Scan → Scanning.
3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Related Links
Scan on page 87

Setting Talkgroups in the Active Scan List

When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the
2 Select More . . . → Group Setup → Scan → Active List.
Note: If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press M .
ENU
5 Select one of the following:
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

Setting Scan Lists

When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the
2 Select More . . . → Group Setup → Scan → Scan Lists.
3 Highlight required scan list and press M
• Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
• Clear — Deletes all the talkgroup assigned to that scan list.
• Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup folders and assign
appropriate priority.
• Edit — Changes the priority of the required talkgroup or deletes it.

Deleting Talkgroups from Scan Lists

Procedure:
1 From the home screen, press the
Send Feedback | |
on page 31
key.
MENU
key.
MENU
key.
MENU
to see additional settings:
ENU
key.
MENU