Powering On The Radio - Motorola MTP830 S Feature User Manual

Icon
Related Links
Air Encryption on page 70

Powering On the Radio

Procedure:
1 Press and hold O
N
2 Your radio performs a self-check and registration routine.
3 After successful registration, your radio is in service.
Note: Your radio powers on without visible and audible notification if Covert Mode is activated.
Description
Blinking, when the End-to-End Encryption is enabled
• when receiving voice in Group Calls,
• when receiving voice in Simplex Private Calls,
• during encrypted Duplex Private Calls.
SDS End-to-End Encryption
Solid, when the E2E status of an SDS message, or the E2E status of a message recipient
address.
In High Security mode, when your radio processes only the encrypted information, this
icon is always visible in when you are in the messages menu (for example, Inbox).
Keys Locked — Indicates that keys are locked.
Non Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call — Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the radio:
• Is in TMO Mode.
• Communicates through a gateway.
Not Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The icon appears
after the PTT button is pressed.
Remote Control
Indicates that the radio is being remotely controlled and some commands are being exe-
cuted in the background. For example, when the radio is controlled via special SDS mes-
sages or triggered to send a GPS location report.
The icon is not visible in the Extra Zoom Mode.
button.
Getting Started | 27
| | Send Feedback