Deleting Marked Text; Replacing Marked Text; Moving And Copying Marked Text - Videonics PTM-1 User Manual

Personal TitleMaker

Deleting Marked Text

To delete marked text:
1
Mark the text as described above.
2
If necessary, position the fat cursor immediately after the
end marker. The cursor must be in this position.
3
Press
If after deleting the text you change your mind, immediately press
. You must do this immediately after pressing
UNDO
wise you cannot recover the deleted text.

Replacing Marked Text

To replace marked text:
1 Mark the text as described above, and press
2
Type the new text.

Moving and Copying Marked Text

To move or copy marked text:
1
Make sure the text is properly marked, as explained in the
preceding sections.
2 Move the cursor to the location to which you want to move
or copy the marked text.
3
To move the marked text, press
appears from its original location and reappears at the new
location.
To copy the marked text, press
remains at its original location and a duplicate appears at
the new location.
Note
84
.
DELETE
When copying text from one location to
another, you might run out of memory. If this
occurs, this message appears. You need to
remove some text before you can complete
the copy.
DELETE
DELETE
. The marked text dis-
MOVE
. The marked text
COPY
User Guide
, other-
.