Playback Options; Playing All Pages; Playing Selected Pages - Videonics PTM-1 User Manual

Chapter 12
P
LAYBACK
As indicated at the beginning of this chapter, you can control Personal
TitleMaker in many different ways while playing projects. This section
summarizes the options. They are explained in detail in the step-by-
step instructions.

Playing All Pages

To play all pages in a project, regardless of the current cursor
position:
Enter
cmd
Playback begins with page one and continues through and including
the last page in the project, using all specified page attributes. The
project stops playing after the final page.

Playing Selected Pages

To begin playback from a specific page in a project:
1 Make sure that none of the pages are marked. If any are
marked, press
2
Working on either the Page Index or Editing Screen, position
the cursor in the page with which you want to begin play-
back.
3
Press the
PLAY
Playback begins with the page containing the cursor and continues
through and including the last page in the project, using all specified
page attributes.
O
PTIONS
+ .
CMD PLAY
+
PLAY
to clear the marks.
UNDO
key.
PLAY
Playing and Recording Projects
119