Videonics PTM-1 User Manual page 49

Chapter 4
3 Press
on page two (just after London), then press
Move the cursor to the beginning of the page (just in front of
Touring), then press
You are marking the text you need to copy to page three.
4
Move the cursor back down to page three, press
press
The text from page two is now part of page three. Be sure to press
UNDO
5
Press
line remains empty, so you don't need to type anything on
that line.
6
Press and hold the
times. This creates the line of bullet symbols.
7 Press
8 Press
ferent font to use for the text (1997) you just entered, then
press
You might recall from an earlier lesson that you marked the text
(Touring London) before specifying a different font, but did not do
so in this case. When you specify fonts and styles, they always
apply to the entire line upon which the cursor is located — which
is what you've done in this step. When you want to set the font for
more than one line at a time, you must first mark the text so that
Personal TitleMaker knows you want to treat multiple lines.
9 Press
page header information for page three.
10 Press
tom sub-menu and select the infinite duration option, then
press
In order for the trick we discussed earlier to work, you must use a
cut transition. If you use any other type of transition it affects the
entire page, causing the title "Touring London" to transition away
to move the cursor to the end of the text
LEFT ARROW
.
UNDO
to remove the markers from the text.
twice to create two blank lines. The first
NEW LINE OK
ACCENT
to create the final line, then type 1997.
NEW LINE OK
/ &
FONT FONT SIZE
.
NEW LINE OK
a couple of times so that you can see the
UP ARROW
/ , select the cut transition, move to the bot-
EFFECTS IN
.
NEW LINE OK
Cut Transition Icon...
.
MARK START
key, then type the letter
to display the font menu, select a dif-
...Infinite Duration Icon
Personal TitleMaker Tutorial
MARK END
COPY
U
.
, then
fifteen
41