APRILIA RSV4 Factory Service Station Manual page 338

Hide thumbs Also See for RSV4 Factory:

Table of Contents

Remember to couple the connecting

rod shank and cap correctly, combin-

ing the respective numerical referen-

Use new connecting rod screws, lubri-

cating the thread and under the head..

Proceed with tightening according to

the procedure described in the tighten-

ing torque table using the torque

wrench and angular tightening with a

Crankcase closing

Insert the crankshaft together with con-

necting rods and pistons in the upper

Position the three centring dowels in

the crankcase.

Insert a new oil seal O ring in the spe-

RSV4 Factory