Videonics Firestore Instruction Manual page 54

PAGE 48 VIDEONICS FIRESTORE
Timecode
Like audio and video data, timecode may also be part of the DV video
stream. It is possible to record source device timecode as part of a particular
clip on FireStore. This timecode will then be available for later use in an
NLE package that is able to extract the timecode. No setup procedure is
necessary to record incoming timecode on FireStore. If the timecode is
present, it will be recorded to the file.
In the example below, a clip that was recorded on FireStore and then im-
ported to Adobe Premiere shows the clip duration on the left and the source
timecode on the right.
Clip Duration. Source Timecode.
FireStore's LCD display will not display source timecode. It simply acts as a
timecode counter for each particular clip.