Table of Contents
Advertisement
PAGE 8
pressed again, connected hard drives will dismount
from the computer and return to FireStore control.
Mode: Pressing this button alters the LCD display to either
display current clip timecode or time remaining per
clip.
Shift Mode
When in NORMAL mode, you access FireStore's SHIFT mode by pressing the
SHIFT/ALT button once. The button will remain illuminated while in SHIFT
mode. Anytime a button is pressed, the button will follow the function that is
labeled directly below that particular button.
FireStore will remain in SHIFT mode until the SHIFT/ALT button is pressed
again. When the button is no longer lit, it is back in NORMAL mode.
Note: In order to access the following SHIFT functions, FireStore' SHIFT/ALTs
button must be ON (not FLASHING or OFF.)
If FLASHING, FireStore is in ALT mode - see pg. 9. If OFF, FireStore is in NOR-
MAL mode - see pg. 6).
Back 1 Frame: When this button is pressed, FireStore
1 FRM
will go back one frame. If the button is pressed during PLAY
mode, FireStore will go into PLAY-PAUSE mode. FireStore
must be in PLAY mode to use this feature.
Play: Same as NORMAL PLAY. See pg. 7.
VIDEONICS FIRESTORE
Shift
Functions
In SHIFT mode, the
SHIFT/ALT button
will be ON.
Advertisement
Table of Contents
