Table of Contents
Advertisement
VIDEONICS FIRESTORE
8. To create a partition, click on the area marked "unallocated". See below:
9. From the Action menu, select All Tasks -> Create Partition. This will launch
the Create Partition Wizard.
10. Start the Wizard by clicking Next. Choose Primary Partition followed by
Next.
11. Enter the amount of disk space to be used (it is recommended that you
choose the maximum available disk space).
12. Assign a drive letter or path followed by Next.
13. Choose FAT32 as the File System to Use under Formatting. Ensure that the
"Perform a Quick Format" box is checked. See Below:
14. Review your settings. Click Finish to begin format.
15. When finished, the drive will display in Computer Management with the
size of the partition (GB), the file system (FAT32) and a Healthy Status.
16. You have now created a volume which will allow FireStore to create a
FAT 32 volume of its own. Disconnect the FireWire drive from your com-
puter and connect it to FireStore. Follow the steps in "Formatting a New FAT32
FireWire Disk Drive for the First Time" on page 35.
PAGE 39
Click on area marked
"Unallocated"
Advertisement
Table of Contents
