Table of Contents
Advertisement
PAGE 10
FireStore will remain in ALT mode until the SHIFT/ALT button is pressed
again. When the button is no longer flashing, it is back in NORMAL mode.
Note: In order to access the following ALT functions, FireStore's SHIFT/ALT but-
ton must be FLASHING (not ON permanently or OFF. If ON- PERMANENTLY,
FireStore is in SHIFT mode - see pg. 8. If OFF, FireStore is in NORMAL mode - see
pg. 6).
Decrease Playback 1FPS: Slows down FireStore playback
- 1 FRM
by 1 frame per second increments. It is adjustable between
15 frames per second to 1 frame per second.
Reverse Play: Pressing this button will play the current
clip or disk in reverse at either 30 frames per
second (NTSC) or 25 frames per second (PAL).
Increase Playback 1FPS: Increases FireStore playback by 1
+ 1 FRM
frame per second increments. It is adjustable between 1 frame
per second and 15 frames per second.
Loop: Specifies FireStore's default playback ability. Loop
LOOP
mode allows you to select between playing back the selected
clip, playing back the entire disk(s), looping the current clip
or looping the entire disk(s). Once set, FireStore will
remain in the selected loop mode until changed to another.
No Function.
ALT
In ALT mode, the
SHIFT/ALT button
will flash.
VIDEONICS FIRESTORE
Alt Key
Functions
Advertisement
Table of Contents
