Table of Contents
Advertisement
PAGE 32
VIDEONICS FIRESTORE
When complete, the default LCD screen will appear:
If the connected disk drive is too fragmented, it may be necessary to reformat
the drive or switch too another drive. Information on the particular drive
will still be OK, but further recording may result in lost footage. The follow-
ing LCD screen will appear when the disk is too fragmented for use:
To format a drive, see page 30.
Base File Name
FireStore identifies each clip on the LCD display in the order clips were re-
corded. This is determined by the date and time based file name that was
created using FireStore's internal clock (see "Setting Time and Date" on page
27 for more information). This file name is known as the BASE FILE NAME.
It is possible to see this name on the FireStore LCD display for the currently
selected clip by doing the following. Press and hold FireStore's SHIFT/ALT
(
)
button for two seconds to enter the ALT mode. This key should
(
)
FLASH. Press the FORWARD INDEX
button to activate BASE FILE
NAME. The following LCD screen will display:
This file name corresponds with the file name as it will appear on a computer
system. For instance, this file may appear as either 20010219-141058.dv (if it is
a Raw DV file format) or 20010219-141058.avi (if it is an AVI Type 1 or 2 file
format). See "Record File Format on page 28 for more information.
Delete File
It is possible to delete files from FireStore. To delete a selected file or clip,
simply scroll through to the particular clip using FireStore's BACK
Advertisement
Table of Contents
