Table of Contents
Advertisement
VIDEONICS FIRESTORE
PAGE 19
You are now in FireWire Slaved mode. FireStore will automatically go into
(
)
REC PAUSE mode. To exit, hold down the MODE
button for
another two seconds and reselect LOCAL control.
Record a Single Frame (Still Rec)
It is possible to record a single DV frame with FireStore in the REC STILL
mode. In REC STILL mode, FireStore will capture the current frame and save
it in a clip. Each sequential press will add another frame to that clip. To
(
)
access this mode, press the SHIFT/ALT
button once. This button
(
)
will stay illuminated. Every time you press the RECORD
button,
FireStore will capture the current frame (and any additional frames) and save
it to disk in a clip. During capture, the LCD will display the following screen:
It will have the same clip name structure (see pg. 27, "Set Time and Date") as
standard video clips. To create a new clip, simply press FireStore's STOP
(
)
button followed by the RECORD STILL sequence again. To exit this
(
)
mode, simply press the SHIFT/ALT
again.
Triggering Record from the GPI Port
It is possible to trigger record using FireStore's GPI port. To access FireStore's
(
)
default GPI settings, press the MODE
button for about two
seconds. After two seconds, the default SETUP screen will display which is
shown below.
When the GPI is triggered, FireStore will cycle between pause and un-pause.
to cycle to the other GPI function modes, press the FORWARD IN-
(
)
DEX
button. Other modes are Index (New File) which ends the
Advertisement
Table of Contents
