Omega i Series User Manual page 55

TEMPERATURE UNIT SUBMENU:
Includes a byte in the data string to indicate whether reading is in Celsius or
Fahrenheit.
Press d
Press b
Press d
ADDRESS SETUP SUBMENU:
This menu is applicable to the RS485 Option only.
Press d
ADDRESS VALUE SUBMENU:
Press d
Press b & c 55) Press b and c to enter new "Address Value".
Press d
TRANSMIT TIME INTERVAL SUBMENU:
This menu is applicable if "Continuous" Mode was selected in the "Data
Flow Mode" Submenu and the device is configured as an RS232C
Standard device. Also, one or more options under the Data Format
Submenu must be enabled.
Press d
TRANSMIT TIME INTERVAL VALUE SUBMENU:
Determines the interval at which data will be emitted to the RS232 Serial Bus
when the instrument is in Continuous Data Flow Mode.
Press d
Press b & c 59) Press b and c to enter new "Transmit Time Value", e.g.
Press d
For more details, refer to the Communication Manual available at the
website listed on the cover page of this manual or on the CD-ROM
enclosed with your shipment.
50) Display flashes previous selection for UNIT .
51) Scroll through the available selections: NO, YES.
52) Display shows STRD stored message momentarily and then
advances to ADDR only, if it was changed, otherwise press a to
advance to ADDR Address Setup Submenu.
53) Display advances to "Address Value" (0000 to 0199) Submenu.
54) Display flashes 1
56) Display shows STRD stored message momentarily and then
advances to TR.TM only, if it was changed, otherwise press a to
advance to TR.TM Transmit Time Interval Submenu.
57) Display advances to "Transmit Time Value" Submenu.
58) Display flashes 1
seconds.
0030 will send the data every 30 seconds in Continuous Mode.
60) Display shows STRD stored message momentarily and then
advances to COLR only, if it was changed, otherwise press a to
advance to COLR Color Display Selection Menu.
st
digit of previously stored Address Value.
st
digit of previous "Transmit Time Value" in
51