SHIFT PEDAL ADJUSTMENT
EB304080
SHIFT PEDAL ADJUSTMENT
1. Check:
S Shift pedal position
Check the shift pedal rod length a .
If the position is incorrect ! Adjust.
2. Adjust:
S Shift pedal position
***************************************
Adjustment steps:
S Loosen both locknuts 1 .
S To obtain the correct pedal position turn the
shift pedal rod 2 in or out.
Turning in:
Turning out:
S Tighten both locknuts.
***************************************
NOTE:
S Align the mark on the shift shaft with the center
of the slit.
S Turn in the both side of the shift pedal rod more
than 4 times.
–21–
INSP
ADJ
Shift pedal rod length:
168 mm
shift pedal is lowered.
shift pedal is raised.