Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha FL150A Owner's Manual

sure. NOTICE: Do not use the
[EWM00262]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trail-
ered in the normal running position,
use an additional support device to
secure it in the tilt position. For more
detailed information, see page 58.
[ECM01641]
4. Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
tilt switch " " (down) to retract the trim
rods. NOTICE: Make sure that the trim
rods retracts completely during moor-
ing. This protects the rods from ma-
rine growth and corrosion, which
could damage the power trim and tilt
mechanism.
[ECM00252]
EMU33121
Procedure for tilting down (power trim
and tilt models)
1. Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
UP
DN
DN
DN
Operation
"
"
ZMU01936
ZMU04603
55