Specifications And Requirements; Specifications - Yamaha FL150A Owner's Manual

EMU34520

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
TIP:
"*" means, select the engine oil referring to the
chart of engine oil paragraph. For further infor-
mation, see page 12.
EMU2821J
Dimension:
Overall length:
862 mm (33.9 in)
Overall width:
511 mm (20.1 in)
Overall height L:
1714 mm (67.5 in)
Overall height X:
1842 mm (72.5 in)
Transom height L:
516 mm (20.3 in)
Transom height X:
643 mm (25.3 in)
Weight (SUS) L:
219.0 kg (483 lb)
Weight (SUS) X:
224.0 kg (494 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
110.3 kW@5500 r/min (150 HP@5500
r/min)
Idle speed (in neutral):
700 ±50 r/min

Specifications and requirements

Engine:
Drive unit:
Type:
4-stroke L
Displacement:
2670.0 cm³
Bore × stroke:
94.0 × 96.2 mm (3.70 × 3.79 in)
Ignition system:
TCI
Spark plug (NGK):
LFR5A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Control system:
Remote control
Starting system:
Electric starter
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.17–0.23 mm (0.0067–0.0091 in)
Valve clearance (cold engine) EX:
0.31–0.37 mm (0.0122–0.0146 in)
Min. cold cranking amps (CCA/EN):
711.0 A
Min. rated capacity (20HR/IEC):
100.0 Ah
Maximum generator output:
36 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.00(28/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F150AET M
F150AET1 M
FL150AET ML
FL150AET1 ML
9