Setting Up The Camera - Swann SWNHD-818CAM Instruction Manual

Welcome
Congratulations on your purchase of this Swann Super HD Security Camera
with Power Over Ethernet. You've made a fine choice for keeping a watchful
eye over your home or business. The camera delivers brilliant and amazingly
clear high definition images and videos in both day and nighttime conditions
even in complete darkness. Designed in an elegant, unobtrusive weatherproof
casing with an integrated 3-axis mounting bracket, the camera is versatile
enough to be installed on walls and ceilings - indoors or outdoors and will be
an excellent addition to your Swann POE NVR monitoring solution.
This instruction manual will walk you through the basics of installing and
connecting your camera.

Setting up the camera

Connecting the camera to your Swann NVR
This camera uses a single Power Over Ethernet (PoE) connection, a technology that
allows the camera to be directly powered over the Ethernet cable from the NVR itself.
Simply plug one end of the included Ethernet cable into the "LAN" connector on the
camera and plug the other end into any available network video port on the back of
your NVR, as shown below.
Camera
* If you are connecting the camera to your NVR via additional network hardware such as switches
and routers that do not support PoE then you can power the camera using this DC 12V input.
4
Reset button
DC Power connector*
Network (LAN) connector
DC 48V
IN
Ethernet cable
NVR
eSATA
AUDIO
USB HDMI VGA LAN
OUT
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16