EPSON Stylus PHOTO RX600/610, RX620/630
5.2 Adjustments by Adjustment Program
5.2.1 Overview
This machinery is adjusted by using specialized adjust program. Adjusted revision
figure is written into EEPROM of Main Board.
Operating environment
OS :
Windows98/Me/2000/XP
Hardware :
PC equipped with USB 1.1/2.0 I/F
Program constitution
•
SPRX600_Ver10.exe (program main file)
•
D4Comm.dll
•
OsSwitch.dll
•
PrnDrv98.dll
•
PrnDrvXP.dll
5.2.1.1 Installing the Adjustment Program
Copy the five files listed above into any desired folder on the PC.
Before installing this program, make certain that a USB
C H E C K
P O I N T
driver has been installed on the PC properly.
Make sure that the five files are contained in the same folder.
5.2.1.2 Starting the Adjustment Program
1.
The following start screen is displayed when the adjustment program has been
started. Then select a model name, destination and port.
Figure 5-1. Adjustment Program Start Screen
Adjustment
2.
Click the [OK] button.
C H E C K
P O I N T
3.
Select the item to be executed by clicking the tab.
Quitting the program
Clicking the [Quit] button displays the window shown below.
[Quit] button :
[Continue] button :
Adjustments by Adjustment Program
While Stylus PHOTO RX600/610, RX620/630 is warming up
(Power LED is flashing), you cannot run the program (a
communication error occurs). Run the program after making
certain that the Power LED of the printer is lit.
Click a tab for selection
[Get Status] button Acquires
printer information, and displays it
to the right.
[Quit] button
Figure 5-2. Adjustment Program Screen
Finishes the adjustment and closes the program.
Returns the program to the start screen.
Figure 5-3. Quit Screen
Revision C
66