Troubleshooting At Unit Level - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

3.2 Troubleshooting at Unit Level

By following this troubleshooting procedure, when some trouble has occurred, you can
easily identify the unit which is the cause of the trouble, from its observation. Table 3-1
and Table 3-2 list the observations of various troubles. Once the type of the trouble has
been identified, refer to the flowchart for that trouble.
The flowchart shown in Table 3-1 outlines the troubleshooting procedure.
NOTE: See " 3.6 Troubleshooting for Motors and Sensors" (p35)
for motors and sensors.
Identifying the Trouble
Table 3-1, "LCD Indication"
Table 3-2, "Observations and Troubleshooting Flowcharts"
Repair at Unit Level
Diagnosing the Following Units
Repair at Parts
Level
Printer Mechanism
Figure 3-1. Troubleshooting Flowchart
Troubleshooting
for troubleshooting
Scanner Mechanism
Motor and Sensor Repair
Disassembly = Chapter 4
Adjustment = Chapter 5
Troubleshooting at Unit Level
Table 3-1. LCD Indication
LCD Indication
Error Status
EMC
Fatal error in Printer error occurred.
printer Please see the
documentation.
Fatal error in Scanner error occurred.
scanner Please see the
documentation.
Scanner unit
Scanner unit open. Please close the scanner unit.
is open
Paper out in Paper out or feed error.
printer Please insert paper or clear
the paper feed error, then
press the Color button.
Paper jam Paper jam. Press the color
button or Load/Eject button.
If the error is not cleared,
please manually clear the
jam.
No ink No cyan ink cartridge. Press
cartridge the OK button to install a
new ink cartridge.
Ink out Black ink out. Press the OK
button to replace the
cartridge.
Ink cartridge Ink cartridge(s) cannot be
error found. Please insert ink
cartridge(s) and press the
OK button to continue.
Revision C
LED Indication
Error
Power
EAI
Printer error occurred.
Lighting
‑
Please see the User's Guide.
Scanner error occurred.
Lighting
‑
Please see the User's Guide.
Lighting
‑
Paper out or feed error.
Lighting
Please insert paper or clear
‑
the paper feed error, then
press the Color button.
Paper jam. Press the color
button or Load/Eject button.
Lighting
‑
If the error is not cleared,
please manually clear the
jam.
No cyan ink cartridge. Press
Lighting
‑
the OK button to install a
new ink cartridge.
Black ink out. Press the OK
Lighting
‑
button to replace the
cartridge.
Ink cartridge(s) cannot be
Lighting
found. Please insert ink
‑
cartridge(s) and press the
OK button to continue.
LED
up
up
up
up
up
up
up
up
21