EPSON Stylus PHOTO RX600/610, RX620/630
4.6 Disassembly and Assembly of Other Parts
4.6.1 Damper Assembly
1.
Panel Unit Removal. (p41)
2.
Main Board Unit Removal. (p.61) (as needed)
3.
Remove a screw that secures the damper assembly, and remove it from the middle
housing.
For installing the damper assembly, close the slot cover, and follow
the conditions as shown oi the figure below:
4.6.2 Stacker
1.
Panel Unit Removal. (p41)
2.
Scanner Unit Removal. (p42)
3.
Middle Housing Removal. (p43)
4.
Remove the stacker by sliding forward while pushing projected areas located right
stacker.
Disassembly and Assembly
Slot Cover
Stacker
Disassembly and Assembly of Other Parts
Damper Assembly
Figure 4-21. Damper Assembly Removal
Figure 4-22. Stacker Removal
Revision C
C.B.P Tite 3x10,F/ZN
Tightening torque
⋅
:0.6 ± 0.1 N
m
60