Asf Unit Removal - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

4.5.4 ASF Unit Removal

1. Middle Housing Removal. (p43)
2. Remove three screws that secure the ASF unit.
3. Remove the ASF unit from the main frame upward.
Do not touch the LD Pad or Hopper Pad of the ASF Unit.
C A U T I O N
Do not reuse any scratched pad.
When securing the ASF unit to the main frame, pay attention to
the installed location of the LD roller cover.
Lubrication required. For lubrication, refer to the following
section.
6.3.3 Lubrication Points of the Printer (p83)
Disassembly and Assembly
C.B.S TITE (P4) R 3x6,F/ZN
Tightening torque:0.8 ± 0.1 N
Disassembly and Assembly of Printer Unit
ASF Unit
⋅
m
Figure 4-13. ASF Unit Removal
Revision C
C.B.S 3x6,F/ZN
Tightening torque
⋅
:0.8 ± 0.1 N m
C.B.P Tite 3x8,F/ZN
Tightening torque
⋅
:0.6 ± 0.1 N m
55