Lcd Assy Removal; Disassembly And Assembly Of Lcd Assy - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

4.3.2 LCD ASSY Removal

1. Remove the one screw securing the right bush.
2. Remove the right bush from the front middle cover.
3. Remove the one screw securing the LCD ASSY.
4. Remove the LCD ASSY from the front middle cover.
5. Remove the left bush.
6. Release the hook fixing the clutch spring.
7. Remove the clutch spring from the left bush.

4.3.3 Disassembly and Assembly of LCD ASSY

1. Remove the LCD ASSY.
2. Remove the four screws securing the lower case.
3. Remove the lower case from the upper case.
4. Remove the LCD module from the upper case.
Disassembly and Assembly
C.B.P Tite 3x10,F/ZN
Tightening torque:0.6 ± 0.1 N
Left Bush
C.B.P Tite 3x10,F/ZN
Tightening torque:0.6 ± 0.1 N
Upper Case
Disassembly and Assembly of Panel Unit
⋅
m
LCD ASSY.
Clutch Spring
⋅
m
Right Bush
Figure 4-5. Removing the LCD ASSY
LCD Sheet
LCD Module
Lower Case
C.B.P Tite 2x8,F/ZN
⋅
Tightening torque:0.25 ~ 0.3 N m
Figure 4-6. Disassembly of the LCD ASSY
Revision C
Front Middle Cover
LCD Harness
46