Toshiba MMK-AP0157HP-E Service Manual page 40

Function selection setup
<Procedure> Perform setting while the air conditioner stops.
1
CL
Push + +
TEST SET
The first displayed unit No. is the header indoor unit address in the group control.
In this time, fan and louver of the selected indoor unit operate.
2
UNIT LOUVER
Every pushing
displayed one after the other.
In this time, fan and louver of the selected indoor unit only operate.
3
Using the set temperature
4
Using the timer time
5
Push SET button. (OK if indication lights)
• To change the selected indoor unit, proceed to Procedure
• To change item to be set up, proceed to Procedure
6
Pushing button returns the status to the normal stop status.
TEST
buttons simultaneously for 4 seconds or more.
button (button at left side), the indoor unit No. in the group control is
buttons, specify the CODE No. (DN).
TEMP.
buttons, select the set data.
TIME
TEMP.
3
6
FILTER L L
RESET TEST
1
<Operation procedure>
1 2 3
2
.
3
.
ON / OFF
TIMER SET FAN MODE
VENT
SET CL SWING/FIX UNIT LOUVER T
4 5 6
END
- 40 -
FILE NO. SVM-18070
4
5
2