Oki C301 Maintenance Manual page 133

Oki Data CONFIDENTIAL
Panel display ( identi- On- Atten-
fies that no display is line tion
provided) lamp lamp
Varies On
(Off)
ORDER FUSER
Varies On
(Off)
ORDER BELT
Varies On
FUSER LIFE
Varies On
BELT LIFE
Varies On
%COLOR% TONER
EMPTY
44951501TH Rev.2
Detail
Indicates the fuser is near the end of
its life. With ADMIN MENU-CONFIG
MENU-NEARLIFE LED set to DISABLE,
the attention LED is not lighting.
Indicates the transfer belt is near the
end of its life. This display is a warning
and the printer does not stop printing.
With ADMIN MENU-CONFIG MENU-
NEARLIFE LED set to DISABLE, the
attention LED is not lighting.
Indicates the fuser is at the end of its Replace the
life (a warning). This display is only fuser to a new
a warning (not a life error). By cover one.
opening and closing after the printer has
a fuser life error, this status is displayed.
Indicates the transfer belt is at the end Replace the
of its life (a warning). This display is only belt unit to a
a warning (not a life error). By cover new one.
opening and closing after the printer
has a transfer belt life error, this status
is displayed.
Indicates the printer ran out of toner. Replace the
When temporally recovered by cover cartridge of the
opening and closing during a toner- toner to a new
empty error, the printer develops this one.
status (warning).
%COLOR%
Y
M
C
K
Panel display ( identi-
Solution fies that no display is
provided)
−
%COLOR% REPLACE
TONER
−
%COLOR% TONER
NOT INSTALLED
DRUM UNIT LIFE
BELT REFLEX
ERROR
DENSITY SHUTTER
ERROR2
On- Atten-
line tion Detail
lamp lamp
Varies On Indicates the printer ran out of toner.
Having no print data, the printer
develops this status. The printer can
print monochrome data with issuing this
warning, and changes the display to an
Empty error for color data to print.
%COLOR%
Y
M
C
K
Varies On Indicates the toner cartridge is not
installed. This status is only a warning.
%COLOR%
Y
M
C
K
Varies On Indicates an image drum reached the end
of its life. When temporarily recovered
by cover opening and closing during an
image drum life error, the printer develops
this status (warning).
Varies On A belt reflection rate check error.
The printer has the error in no user
environments because, when it is in the
Shipping mode and the PU firmware
detects this status, the PU firmware
provides no notice to the CU firmware.
Varies Varies A density adjustment shutter error 2.
The printer has the error in no user
environments because, when it is in the
Shipping mode and the PU firmware
detects this status, the PU firmware
provides no notice to the CU firmware.
7. TROUBLESHOOTING
Solution
Replace the
cartridge of the
toner to a new
one.
Install the
toner cartridge
properly. Note
the cartridge
shipped,
installed in the
printer cannot
be used after
a supply toner
cartridge is
used in it.
Replace the
image drum for
the displayed
color.
−
−
7-8