Power Sub-System
2.1.1
Hot Swapping Power Modules
The Storage System SSR212MA power supply assembly is capable of supporting hot swapping
of power supply modules in a 1+1 configuration.
2.1.2
Power Supply Outputs
The Storage System SSR212MA power system supports one or two 500 W Power Supply
module's in a 1+1 redundant configuration. The power supply module provides five DC output
rails; +12V1, +12V2, +12V3, -12V, +5VSB, while the Power Supply Enclosure provides two DC
output rails: +3.3V and +5V.
Table 5. Enclosure & Module Output Summary (500W 10 second peak ratings)
+3.3V
20A
NOTE: The total combined power for +3.3V & +5V should not exceed 120W. The total combined power for +12V, -
12V, 5VSB should not exceed 360W.
The module provides a handle to assist in insertion and extraction and can be inserted and
extracted without the assistance of tools.
2.1.2.1
Power Supply LED Indicator
The power supply module provides a single external bi-color LED to indicate the status of the
power supply. When AC is applied to the Power Supply Unit (PSU) and standby voltages are
available, the LED will blink green. The LED will be solid on green to indicate that all the power
outputs are available. The LED will be solid on amber to indicate that the power supply has
failed, shutdown due to over current, shutdown due to over temperature, or is indicating a
predictive failure. Refer to the following table for conditions of the LED.
POWER SUPPLY CONDITION
No AC power to all PSU
No AC power to this PSU only
AC present / Only Standby Outputs
On
Power supply Direct Current (DC)
outputs ON and OK
Power supply failure (includes over
voltage, over temperature)
Voltage Regulator Module (VRM)
failure (cage related)
240VA limit (cage related)
Current limit
18
+5V
+12V1
+12V2
20A
18A
18A
Table 6. LED Indicators
Revision 1.4
Intel® Storage System SSR212MA
+12V3
-12V
18A
0.5A
Power Supply LED
OFF
AMBER
BLINK GREEN
GREEN
AMBER
BLINK GREEN
BLINK GREEN
AMBER
5VSB
2.5A