Panasonic KX-TVS50 Installation Manual page 300

SYSTEM ADMINISTRATOR'S GUIDE
Digit Translation Table Parameters
Use the Digit Translation Table to translate the Follow On ID Signal from the PBX into the
proper codes for the VPS. This translation table is only effective for the incoming signal.
To access the proper menu for Digit Translation Table Parameters, follow the menu
path as shown:
System Administration Top Menu-1-6-3-3
Digit Translation Table Parameters-Inter-Digit Timeout
To access the proper menu for Inter-Digit Timeout, follow the menu path as shown:
System Administration Top Menu-1-6-3-3-1
Parameter
Inter-Digit
Timeout
Digit Translation Table Parameters-Input/Output
To access the proper menu for Input/Output, follow the menu path as shown:
System Administration Top Menu-1-6-3-3-2
Parameter
Table Input digit
1-8
Output
300
Value Range
(Default)
1-4 s Defines the incoming signal interval (Follow on ID). The
Digit Translation Table is translated by a series of signals
(1)
received within the specified time period.
Value Range
(Default)
Up to 8
digits
consisting of
digit
0-9, , #,
A-D
(None)
Table 78
Description/Function
Table 79
Description/Function
Do not assign more than 1 code to an incoming
signal. If this occurs, the system will take the first
assignment.
Installation Manual