Panasonic KX-TVS50 Installation Manual page 130

CUSTOMIZING THE SYSTEM
Enter data into the Custom Service menu; use the table below as a guide.
Description
Prompt Mode 1. System
Menu Repeat
Cycle
Call Transfer
Any Time
Wait for
Second Digit
No DTMF
Input
Operation
Keypad
Assignment
130
Value Range
(Default)
Specifies the language that the caller will hear when
2. User 1 calling this Custom Service.
3. User 2
(System)
1-3 Times Specifies the number of times the Custom Service
(3) menu will be repeated before the No DTMF Input entry
is used.
Extn./Mbx/No Specifies where a caller will be transferred when
(Extn.) dialing an extension or mailbox number during the
menu. If this entry is set to "Extn.", the caller will be
transferred to the corresponding extension. If it is set to
"Mbx", the caller will be sent directly to the
corresponding mailbox. If it is set to "No", extension
transfer and mailbox transfer are disabled; only 1-digit
entries work (following the Custom Service menu).
Note: This parameter should be set to "No" when
Subscriber Service is specified as a Custom Service
option and it is desired that digits can be entered very
quickly to specify a mailbox. Therefore, in most cases,
"No" is the best setting for this parameter. This is
especially true if you do not want to explain "Call
Transfer Any Time" in your Custom Service menu
recording.
1-5 s Used when the first digit of an extension is also a menu
(1) choice within the Custom Service. If a second digit is
not dialed within the specified time, the menu choice is
used.
a.-f. Used when a caller does not dial anything when hearing
(c.) the menu (usually rotary callers).
a.-n.
Specifies the action to be performed when a keypad
digit is dialed. Callers can access specific services by
( =d, 0=c,
pressing the appropriate keys on their telephones.
others=None)
Table 21
Description/Function
Installation Manual