Panasonic KX-TVS50 Installation Manual page 200

SYSTEM FEATURES
FEATURE
Caller Name allows subscribers to assign up to 30 Caller
Announcement— ID numbers and record a caller name for each
Personal Caller ID number from their telephone. The
(APT/DPT caller name is announced when: (1)
Integration Only) subscribers listen to the messages from
assigned numbers left in their mailboxes, (2)
the VPS transfers calls from assigned
numbers to the subscribers (Caller ID
Screening), and (3) the VPS pages the
subscribers by intercom (Intercom Paging).
Caller ID Screening is enabled or disabled in
the COS (Class of Service) settings.
If the same Caller ID number is programmed
for both the system and personal caller name
announcement, the VPS will use the personal
caller name.
Caller Name allows the System Administrator to assign up
Announcement— to 120 Caller ID numbers. Each Caller ID
System number can have a caller name recorded by
(APT/DPT the Message Manager. The caller name is
Integration Only) announced when: (1) extension users listen to
the messages from assigned numbers left in
their mailboxes, (2) the VPS transfers calls
from assigned numbers to the subscribers
(Caller ID Screening), and (3) the VPS pages
the subscribers by intercom (Intercom
Paging).
Caller ID Screening is enabled or disabled in
the COS (Class of Service) settings.
If the same Caller ID number is programmed
for both the system and personal caller name
announcement, the VPS will use the personal
caller name.
200
Table 34
DESCRIPTION REFERENCES
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Number of CIDs for Caller
Name Announcement" and
"Caller ID Screening" in Table
40 in B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Caller Name
Announcement (System/
Personal)" in Glossary.
• See 4.12 Personal Caller Name
Announcement in the
Subscriber's Guide.
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Caller ID Screening" in
Table 40 in B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See B6.6 System Caller Name
Announcement.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Recording System Caller
Names" in D6 RECORDING
MESSAGES.
• See "Caller Name
Announcement (System/
Personal)" in Glossary.
Installation Manual