Utility Command List (Help) - Panasonic KX-TVS50 Installation Manual

Blank:
Prompt No.:
Prompt No. with an*:
"OFF":
Note
The "Total Number of Registered" shown at the bottom of the screen does not include the
prompts that have been turned off.

7.2.16 Utility Command List (HELP)

Use the HELP command to display the list of all available utility commands.
1.
Type HELP, then Press RETURN.
$ HELP
OFLN
ONLN
PASS
TIME
PSET
ELOG
SAVE
LOAD
GPRN
VERS
CREP [no.]
CCLR [no.]
MWL
MRL
MPLT [opt]
QSET
LMON
PUTD
WCID
$
Installation Manual
The prompt has not been recorded (but the default
[System Prompt] is active)—WILL BE HEARD
The prompt has been recorded—WILL BE HEARD
The prompt has been recorded but is turned off—
WILL NOT BE HEARD
The prompt has never been recorded and the default
prompt has been turned off—WILL NOT BE HEARD
: System Off-line
: System On-line
: Password setting
: Time & Date setting
: Report Print Out Time setting
: Device Error Log Listing
: VPS Program & Date Save (VPS —> PC : Xmodem)
: VPS Program & Date Load (VPS <— PC : Xmodem)
: Parameter Global Printing (only 'ASCII Terminal' mode)
: Program Version Check
: Custom Menu Information List
[no] : Custom Menu No. (1-100)
: Custom Menu Access Counter Clear
[no] : Custom Menu No. (1-100/0) (0: Clear All)
: MWL Retry count Set (1-3)
: Minimum Recording Length Set (0-3)
: Registered User Prompt No. List
[opt] : 1 —> User Prompt 1
2 —> User Prompt 2
None —> User Prompt 1&2
: Quick Setup
: Line Monitor
: DTMF Information Display (Don't leave enabled after
troubleshooting.)
: Wait Time for Caller ID
SYSTEM MAINTENANCE AND TROUBLESHOOTING
175