Ariens Sno-Thro 921023 – Deluxe 28 Track Owner's/Operator's Manual page 12

CHECK TRACK TENSION
(Model 921023)
Check tracking of unit and tension the tracks
as required (see Track Tension Adjustment
on page 31).
CHECK AUGER GEARCASE OIL
Check oil level in auger gearcase (see Check
Auger Gearcase on page 22).
CHECK ENGINE CRANKCASE
OIL
IMPORTANT: The engine may be shipped
with oil in crankcase. Refer to Engine Manual
for detailed instructions.
FILL ENGINE FUEL TANK
Fill fuel tank. DO NOT OVERFILL! See
FILLING FUEL TANK on page 17
If Applicable - remove the protective wrap
from the fuel tank and install the fuel cap
located in the attached bag.
CHECK FUNCTION OF ALL
CONTROLS
Ensure unit runs and performs properly. Refer
to OPERATION on page 15.
RUN-IN ATTACHMENT BELT
1. Start unit in a well-ventilated area
according to Starting and Shut Off on
page 19.
2. Engage attachment clutch lever and run
attachment for about 15 minutes.
3. Stop unit, wait for all moving parts to
stop, and remove spark plug wire.
4. Adjust clutch idler according to
Attachment Clutch/Brake Adjustment on
page 26.
5. Adjust belt finger, if necessary. See
Check Belt Finger Clearance on
page 27.
EN - 12