IN STEPS 2-6, DO NOT BLOCK THE KING
TAILGATER'S LINE OF SIGHT TO THE SATELLITES
IN THE SOUTHERN SKY AT ANY TIME!
2. Use the arrow buttons on your remote to
highlight the letter group that includes the
Press SELECT.
3. Highlight the state you are currently in
from the state menu.
Press SELECT.
4. Verify Scan is highlighted.
Press SELECT.
The scan will begin and may take up to
several minutes to complete.
IMPORTANT!
If you move the antenna unit any
time during or after the scan,
you will have to repeat steps 2-6.
Page 7