Use Metric Units For Gps; Dynamic Dns - NETGEAR LG6100D User Manual

3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
5. In the GPS Settings section beside GPS Mode, select the desired mode (One-time or
Continuous).
6. Click Submit.
Note: The GPS service must be enabled before you can set the GPS mode. (See
Disabling GPS.)

Use Metric Units for GPS

You can use metric units in the display of location information (for example, speed and altitude).
You can choose the units on the gateway's GPS page.
Note: The GPS service must be enabled before you can choose the units. (See
Disabling GPS.)
To specify metric units for the GPS:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click GPS.
5. In the GPS Settings section beside Use Metric units, select Yes (or select No to use
standard measurements).
6. Click Submit.

Dynamic DNS

Learn about Dynamic DNS (DDNS), a service that lets you access your gateway by using a host
name or domain.
A Dynamic DNS (DDNS) service provides a central public database where information (such as
e-mail addresses, host names, and IP addresses) can be stored and retrieved. The Dynamic
DNS server also stores password-protected information and accepts queries based on e-mail
addresses.
Your Network Connections 42
Enabling /
Enabling /