Change The Mtu Size; Led Settings; Router Settings - NETGEAR LG6100D User Manual

576
576

Change the MTU Size

The default MTU size usually works, but you can change the MTU size.
To change the MTU size:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > WAN Setup.
5. In the MTU Size field, enter a value from 64 to 1500.
6. Click Submit.

LED Settings

By default, the LEDs are on because they are status indicators. You can log in to the gateway
and turn the LEDs off and on.
To turn the LEDs off and on:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Device.
5. Beside LED, select On or Off as desired.)
6. Click Submit.

Router Settings

Adjust your gateway's router settings through the Basic, Port Forwarding, and Port Filtering
pages.
Gateway Settings
Typical value to connect to dial-up ISPs.
80