Safety Information - NComputing L300 User Manual

Refer to the following to prevent any physical injury or loss of assets caused by damage to the product.
A user must read this User Manual carefully before use and properly follow the instructions.
Make sure that the place of installation is not too hot (above 35˚C), too cold (below 0˚C), or too
•
wet (above 85% relative humidity).
Avoid any severe impacts to the product
•
Make sure that the product is not exposed to direct sunlight or any hot machinery.
•
Please keep the product away from any items which have strong magnetic properties.
•
Do not disassemble, repair or rebuild the product.
•
Please properly route all cables and power cords to avoid a tripping hazard. An electric shock,
•
fire, damage to the product or physical injury may occur as a result of tripping over the cable.
Page 6 of 76
Safety Information
NComputing L300 and L350 User Manual
498943_v2