Troubleshooting & Error Messages - NComputing L300 User Manual

Troubleshooting & error messages
For the latest information and troubleshooting help, please visit
"No network found" Message
If the access device cannot connect to the network, this error message appears.
Make sure a LAN cable is connected to the access device.
•
Make sure the LAN cable connected to the access device is not a cross-over cable.
•
Make sure the LAN cable is properly connected to the networking equipment.
•
"Can't establish connection to server" Message
This occurs when the access device is set to find the host PC where the vSpace Server software is
installed.
Page 40 of 76
the NComputing online knowledge base at:
http://www.ncomputing.com/support
NComputing L300 and L350 User Manual
498943_v2