L-Series Hardware Setup; L300 Device Setup - NComputing L300 User Manual

L300 Device Setup
The L300 must be connected to the host PC via an Ethernet switch, router, or other network connection.
The L300 has USB ports dedicated for mice and keyboards, as indicated by the mouse and keyboard
symbols below the horizontally oriented USB ports. The vertically oriented USB ports to the left of the
audio connections are for other USB devices.
NOTE: The USB keyboard and mouse ports ONLY support these types of devices. No other types of USB
devices are supported on these ports. The USB keyboard and USB mouse must be directly connected to
these ports and cannot go through a separate USB hub. Peripherals with integrated USB hubs or
combination keyboard/mouse devices are not supported by these ports. Other USB peripherals can be
connected to the USB symbol below the USB ports that are to the left of the 12V DC-IN jack – note that
these generic ports are not active until you have connected to a vSpace session.
Page 27 of 76
L-series Hardware Setup
NComputing L300 and L350 User Manual
498943_v2