Installing And Registering Vspace Server; Connecting Your Devices; Ncomputing Vspace Server 8.4 - NComputing L300 User Manual

NComputing L300 and L350 User Manual
NComputing vSpace Server 8.4
NC-Console Guide
Before beginning, make sure you've downloaded and installed the latest version of vSpace Server for
your selected operating system. For the purpose of this document we will be using vSpace 8.4 Server in
conjunction with the L300 and L350 access devices. Older versions of vSpace Server may contain
variations in console layout and features, but many of the same concepts and terms will apply.
1.1 Installing and Registering vSpace Server
Begin by going to www.ncomputing.com/softwaredownload and downloading the latest version of
vSpace Server. Once the download is complete, launch the vSpace Server installer and proceed through
the guided install and registration process. Be sure to reboot your host once the installation process is
complete. Refer to the "vSpace Server software installation" and "Product Registration" sections earlier
in this document for step by step installation and registration instructions.
1.2 Connecting Your Devices
vSpace Server is now ready to accept connections from L and L-series devices. Keep in mind that, by
default, your devices will automatically look for vSpace hosts on their designated subnet. You can alter
this behavior from the devices themselves or from within the NC-Console (5.4 Connections Tab) at any
time.
Depending on your selected operating system, further configuration steps may be required for the OS
itself (such as adjusting Local Policies or User Groups). Be sure to review our general deployment
checklist to ensure that your environment is properly configured to facilitate device sessions.
http://www.ncomputing.com/kb/NComputing-L-series-Deployment-Checklist_309.html
Once they have connected and received a session, you should register and update your device firmware
(5.1 L-seriesUpdate Tab) as soon as possible.
Page 46 of 76
498943_v2