10. Tip: Avoid pinching the wires. Attach the
Console (4) to the Handlebar (7) with four M4 x
16mm Screws (77).
11. Attach the Upright Cover (57) to the Handlebar
(7) with two M4 x 16mm Screws (77).
12. Attach the Seat Handlebar (10) to the Seat
Carriage (41) with four M8 x 38mm Screws (67);
start all the Screws, and then tighten them.
Plug the wire on the Seat Handlebar (10) fully
into the Frame Pulse Receptacle (42) on the left
side of the exercise bike.
10
Avoid pinching
the wires
11
12
10
Wire
42
12
4
7
77
7
57
77
67
41