NordicTrack VR Pro NTEX07912.1 User Manual page 10

5. Tip: Avoid pinching the wires. Slide the
Upright (2) onto the Frame (1).
Attach the Upright (2) with four M10 x 62mm
Screws (70); start all the Screws, and then
tighten them.
6. Press the mount on the Front Shield (58) into the
Frame (1). Then, press the Front Shield into the
Left and Right Front Shields (13, 14).
5
Avoid pinching
the wires
6
13
10
2
70
1
58
14