Page 1
Model No. NTEX02910.1 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal (under frame) QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK GX 2.0 exercise bike. Cycling is an manual. To help us assist you, note the product model ® effective exercise for increasing cardiovascular fitness, number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
ASSEMBLY • Assembly requires two persons. • In addition to the included tool(s), assembly requires the following tools: • Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you ...
Page 7
3. Loosen the Adjustment Knob (27) in the Frame (1) a few turns. Orient the Seat Post (6) as shown. Then, pull the Adjustment Knob (27) outward and insert the Adjustment Seat Post into the Frame (1). Holes Slide the Seat Post (6) upward or downward to the desired position, and release the Adjustment Knob (27).
Page 8
5. Apply some of the included grease to an M6 x 70mm Bolt Set (50). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar.
Page 9
7. Orient the Upright (4) assembly and the Pivot Cover (12) as shown. Slide the Pivot Cover (12) upward to the Handlebar (5). Tip: Bend and flex the Pivot Cover slightly to slide it over the Handlebar. Attach the Pivot Cover (12) to the Handlebar (5) with two M4 x 16mm Screws (90) and two M4 x 22mm Screws (94).
Page 10
9. Identify the Right Pedal (21). Using an adjustable wrench, firmly tighten the Right Pedal (21) clockwise into the Right Crank Arm (19). Tighten the Left Pedal (not shown) counter- clockwise into the Left Crank Arm (not shown). IMPORTANT: Tighten both pedals as firmly as possible.
HOW TO USE THE EXERCISE BIKE HOW TO PLUG IN THE POWER ADAPTER HOW TO ADJUST THE HEIGHT OF THE SEAT IMPORTANT: If the exercise bike has been exposed For effective exercise, the seat should be at the proper to cold temperatures, allow it to warm to room height.
Page 12
HOW TO ADJUST THE ANGLE OF THE HOW TO MOVE THE EXERCISE BIKE HANDLEBAR To move the To adjust the angle of the handlebar, first loosen the exercise bike, hold adjustment knob a few turns. Next, pull the knob the handle on the outward, pivot the handlebar to the desired angle, and rear stabilizer and then release the knob into an adjustment hole.
Page 13
CONSOLE DIAGRAM FEATURES OF THE CONSOLE With the iFit Live mode, you can download personal- ized workouts, create your own workouts, track your The advanced console offers an array of features workout results, and access many other features. See designed to make your workouts more effective and www.iFit.com for complete information.
Page 14
HOW TO ACTIVATE THE CONSOLE 3. Change the resistance of the pedals as desired. The included power adapter can be used to oper- As you pedal, change the resistance of the pedals ate the exercise bike. See HOW TO PLUG IN THE by pressing the Resistance Increase and Decrease POWER ADAPTER on page 11.
Page 15
Time—When the manual mode is selected, this HOW TO USE A PRESET WORKOUT display mode will show the elapsed time. When a workout is selected, this display mode will show 1. Begin pedaling or press any button on the the time remaining in the workout instead of the console to turn on the console.
Page 16
3. Begin pedaling to start the workout. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedal- Each workout is divided into one-minute segments. ing pace may be slower than the target speed. One resistance level and one target speed are Make sure to pedal at a pace that is comfortable programmed for each segment.
Page 17
HOW TO USE THE IFIT TRAINING MODE HOW TO USE THE INFORMATION MODE The optional iFit Live module allows your console to The console features an information mode that allows communicate with your wireless network and unlocks you to view usage information for the exercise bike, exciting new features.
4. Adjust the contrast level of the display if to the words TRAINER VOICE. Then, press the desired. Enter button repeatedly to turn the voice of the personal trainer ON or OFF. The currently selected contrast level will also appear in the display. To change the contrast level, 7.
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regu- Next, rotate the larly. Replace any worn parts immediately. Left Crank Arm (20) to a vertical To clean the exercise bike, use a damp cloth and a position with the small amount of mild soap.
Page 20
HOW TO ADJUST THE DRIVE BELT Next, rotate the Right Crank Arm (19) to a vertical position with the end of the Right Crank Arm pointing If you can feel the pedals slip while you are pedaling, upward. even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. NTEX02910.1 R0612A Key No. Qty. Description Key No. Qty. Description Frame M6 x 60mm Bolt Set Front Stabilizer Resistance Bracket Rear Stabilizer C-magnet Upright Drive Belt Handlebar Magnet Seat Post Clamp Front Shield Cover Reed Switch/Wire Top Shield Cover Main Wire Rear Shield Cover...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...