NordicTrack VR Pro NTEX07912.1 User Manual page 11

7. Orient the Upright Cover (57) as shown. Hold the
Upright Cover near the Upright (2), and insert
the wires upward through the Upright Cover.
Then, slide the Upright Cover (57) onto the
Upright (2).
8. While a second person holds the Handlebar (7)
near the Upright (2), insert the wires upward
through the Handlebar.
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Upright (2) with two M8 x
22mm Screws (69).
9. While a second person holds the Console (4)
near the Handlebar (7), connect the wires on
the Console to the Main Wire (43), to the Frame
Pulse Wires (42), and to the Extension Wire (86).
Insert the excess wire into the Handlebar (7) or
into the Console (4).
7
Wire Tie
57
8
7
69
69
Avoid pinching
the wires
9
Console
Wires
11
2
Wires
Wire Tie
2
Wires
4
7
86
43
42