Loewe Individual 32 Compose Sound LED Operating Instructions Manual page 29

Initial installation
Setting options for DVB-S reception (continued):
Test reception
FIRST INSTALLATION WIZARD
You should now receive a picture and sound from the following satellite:
ASTRA1 19,2°E
If not, please align your dish correctly. If however it is correctly aligned and
you have an older version you can proceed with
Proceed
OK
After you have made the previous settings, you should
receive picture and sound of the selected satellites (only
possible for Astra1 and HOTBIRD).
OK Proceed.
Settings
INITIAL INSTALLATION (ASTRA1 19,2°E)
HD station preferred
Scrambled stations
Search method
Symbol rate 1 (DVB-S)
Symbol rate 2 (DVB-S)
Proceed
OK
Select and adapt settings.
If several satellites are received, the following settings
must be made for every satellite. The type of settings
available may differ depending on the selected satellite
or network.
HD station Here you can choose whether high resolution channels
preferred should be prioritised in the channel overview.
➠ The menu item is only available for certain receiving
networks.
Encrypted You can state whether coded stations are to be searched
stations for in the search/update. Select yes to save all found
scrambled stations. However, these stations can only be
received in connection with a CA module and the appro-
priate Smart Card. Handling of the CA module is described
on page 63.
If a CA module with a SmartCard is already plugged in for
the station search, all the stations which this module can
descramble are also saved when no is preset.
C/N Level
.
OK
Back
yes
yes
no
OK
Channel search
27500
22000
Back
Search If you want to run the station search independently of
method the channel grid, select frequency search for the search
method.
Symbol rates The symbol rates are specified by the satellite provider
and do not normally need to be changed.
OK Proceed.
(with Setting options for all types of reception on
page 30).
29 -