Loewe Individual 32 Compose Sound LED Operating Instructions Manual page 27

Initial installation
Setting options for the satellite system
(DiSEqC one cable communal system):
DiSEqC one
INITIAL INSTALLATION (DVB-S)
cable
Select DiSEqC single cable communal installation
communal
DELTA SUM-514
DELTA SUM-516
system
DELTA SUM-518
DELTA SUM-918
DELTA SUM-928
KATHREIN EXR-551
KATHREIN EXR-552
KATHREIN EXR-501
Proceed
OK
Select DiSEqC single cable communal installation.
OK Proceed.
Satellite
INITIAL INSTALLATION (DVB-S)
selection
Satellite selection
Satellite 1
Proceed
OK
Select satellites from list,
OK Proceed.
Network
INITIAL INSTALLATION
selection
Network selection
other network
CanalDigitaal
Proceed
OK
Select network.
If several networks are available over DVB-S, you
can decide which network you want to receive your
channels from.
OK Proceed.
LNB
INITIAL INSTALLATION (DVB-S)
frequencies
LNB frequencies
Low band
High band
Proceed
OK
Set LNB frequencies.
Normally, you do not need to change the values for
high and low band, unless the LNC (LNB) of your
satellite system uses a different oscillator frequency
(important for the frequency display).
OK Proceed.
OK
Astra1 19,2°E ...
Back
OK
Back
9750 MHz
10600 MHz
Back
Manual
INITIAL INSTALLATION (DVB-S)
registration
Manual registration (for socket ANT SAT)
Transmission channel
(for socket
Transmission frequency
ANT SAT)
PIN protection
Define/change PIN
Proceed
OK
Select and adjust settings for the DiSEqC single
cable communal installation.
Transmission Select the desired transmission channel and the corre-
channel /frequency sponding transmission frequency.
PIN protection If your system is designed for it, it is possible to protect
your used transmission data from use by other subscrib-
ers with a PIN.
OK Proceed.
(with Setting options for DVB-S reception (continued)
on page 29).
1 2 3 4 5 6
OK
1284
no
0000
27 -