Table of Contents
Advertisement
General Information
Powerline Carrier devices (e.g. X-10 brand devices) are programmable switches that can be used to
perform many different functions. Your system may be set up so that certain lights or other devices can
be turned on or off by using the device command from the keypad. Ask your installer if this has been
done in your system. If programmed for your system, some devices may activate automatically upon
certain system conditions. In this case, the following commands can be used to override the device
activation. See your installer for a full explanation of this feature.
To activate X-10 devices 1-6:
To deactivate X-10 devices 1-6:
To activate X-10 devices 7 & 8**:
To deactivate X-10 devices 7 & 8**:
** Devices 7 and 8 may be assigned to system devices, such as alarm bells, which should not be
activated using this command because they are activated automatically under certain system
conditions. See your installer and the table below.
Device Descriptions
See your installer for device numbers assigned for your system.
Device
1
2
3
4
5
6
7
8
Using Powerline Carrier Device Commands
FUNCTION + LIGHTS ON + dev. no. (2 beeps)
FUNCTION + LIGHTS OFF + dev. no. (2 beeps)
Your user code
Your user code
Description
– 25 –
USER FUNCTIONS
(Lights On/Lights Off Keys)
+ FUNCTION + LIGHTS ON + dev. no. (2 beeps)
+ FUNCTION + LIGHTS OFF + dev. no. (2 beeps)
Advertisement
Table of Contents
