Side Shelf Installation - Napoleon ultra chef 485 series User Manual

Table of Contents

Advertisement

Available languages

Available languages

4 x N570-0082 (1/4-20 X 5/8")

12. Side Shelf Installation

Insert (4) 1/4 - 20 x 5/8" screws through the washers into the threaded holes in the side of the base; do not tighten all the
way. Slide the assembled side shelf over the screw heads and finish tightening.
4 x N570-0082 (1/4-20 X 5/8")
13. Side Burner Installation
Insert (4) 1/4-20 x 5/8" screws through the washers into the threaded holes in the side of the base; do not tighten all the
way. Slide the assembled side burner over the screw heads and finish tightening. Fit the orifice into the burner tube and
secure with the hose retainer clip supplied. Attach the wire from the manifold to the side burner electrode.
4 x N735-0001 (insulated washer)
4 x N735-0001 (insulated washer)
485RSIB MODEL
Fit orifice into burner
tube and secure with hose
retainer clip supplied.
1 x N160-0016 (clip)
WARNING!
is supplied with a drip pan which holds
only a minimal amount of grease. To
prevent grease fires, the pan must be
cleaned after each use.
25
3/8"(10mm)
3/8"(10mm)
The Infrared side burner
www.ultrachefgrills.com

Advertisement

Table of Contents
loading

Table of Contents