Napoleon ultra chef 485 series User Manual page 23

2 x N570-0073 (1/4-20 X 3/8")
10. Transformer / Rotisserie Mount Installation
Connect the two wire connectors from the lights to the two wire connectors coming from the transformer. Install rotisserie
mount bracket to left side of barbecue as shown using (2) 1/4 – 20 x 3/8" screws.
Battery Pack / Rotisserie Mount Installation
Install battery pack below vent slots on left hand panel using magnet supplied with battery pack. Plug wire from LED
(lights) located underneath control panel into wire from battery pack. Install rotisserie mount bracket to left side of
barbecue as shown using (2) 1/4 – 20 x 3/8" screws.
1 x N640-0001
Clip wires from lights
to side panel using
retainer clip supplied.
485RSIB MODEL
3/8"(10mm)
(RSIB MODEL)
(RSB MODEL)
www.ultrachefgrills.com
23