Fender B-DEC30 Midi Manual page 33

73 – 10th Ascii Character of Preset Name
th
73 – 11 Ascii Character of Preset Name
th
20 - 12 Ascii character of Preset Name
73 – Channel Volume
7F – Gain
70 – Pack 3 - MSB of next 7 bytes (111 0000)
2A – Bass Level
03 – Mid Level
22 – Treble Level
00 – bits 6&7 are the compressor type, 1-5 are the amp type
01 – Noise Gate byte format:
0000 0NNN
N – Noise Gate Type
25 – Compressed MIDI Key/Timbre Type
MIDI Key/Timbre Type byte format:
KKKK TTTT
K – MIDI Key
T - Timbre Type
19 – Pattern
02 – Pack 4 - MSB of the next 7 Bytes
5A – Tempo
01 – FX1 – effect type (see table below)
00 – FX2 – reverb type(see table below)
24 – FX1 level
31 – FX2 (reverb) level
52 – FX1 parameter level 1
66 – FX1 parameter level 2
60 – Pack 5 – MSB of next 7 bytes
43 – FX1 parameter level 3
4D – FX1 parameter level 4
70 – Drum Level
62 – Bass Level
70 – Accompaniment level 1
3C – Accompaniment level 2
7F – Mid-sweep frequency - the display value is converted given this
param value as shown below
if (amptype == fba)
{
dispvalue = (1800.0*param)/255.0 + 200.0;
}
else if (amptype == hughes70)
{
dispvalue = (3850.0*param)/255.0 + 150.0;
}
else if (amptype == swr)
{
dispvalue = (600.0*param)/255.0 + 200.0;
}
else
{
dispvalue = (1800.0*param)/255.0 + 200.0;
}
40 – Pack 6 – MSB of last 4 bytes
53 – Contour setting
02 – Bass Toggle Mode – turn bass track on or off with bit 1 (00 or 02)
6F – Checksum
©2005 FMIC
The Trademarks referenced herein, not owned by FMIC, are trademarks owned by their respective owners.
All rights reserved.
's'
's'
' '